SHANGWELL EXTRUSIONMACHINERY CO.,LTD

we sell more than 2000 advanced extrusion lines every year.

Home > Exhibition > Content
Conveying equipment select
- Nov 17, 2016 -

A, environmental conditions are the main considerations

Most of the warehouse is in the air conditioning and lighting conditions. If extreme temperature conditions, requiring special selection of belts, bearings and the drive unit. Although the warehouse is in a relatively clean environment, but conveyor systems may have a clean connection with a harsh environment (such as scrap cardboard boxes). Some articles are based on health, safety factor, should be isolated, these factors will also affect the design of conveyor systems and storage areas.

All goods handling equipment, requires a different level of maintenance for gravity systems, usually to carry out regular checks to ensure the rotation of the wheel properly. In a more complex system, regular maintenance measures should be provided by the manufacturer. General company for expensive manufacturing equipment, will be the preparation of regular maintenance staff, but for the equipment in the warehouse, there is no such need to neglect them. During the initial planning phase, for complex handling systems, maintenance cost, must be included in the procurement budget and maintenance needs to be included in the system of selection and evaluation considerations.

Second, the selection of conveying equipment considerations

Because the surface contact with the conveyor transporting goods and object characteristics directly impact the selection of equipment and system design. Transmission characteristics including size, weight, surface characteristics of the goods (soft or hard), rate of processing, packaging and the center of gravity and so on, are all factors to consider.

When planning for transportation of all goods should be listed, the smallest and the largest, heaviest and lightest, sealed and without seals. In the device's design is not only the largest or heaviest items affect the design.

Lighter items may not be able to make the sensor actuator, smaller items also affects the equipment type selection, such as a drum or belt. For some accumulation conveyor, weight range has an important effect. At the time of planning, the primary system does not need to deal with all of the items, a second set of systems or artificial way to deal with the less frequently used items, it may be more economical.

All new conveyors, must relate to the existing cargo handling equipment, make the best match. Simple systems, such as the use of forklifts; a complex system, such as the use of robots, automatic guided vehicles, or access. Of the system will affect the selection and configuration of equipment, especially in the transportation operations of the handover point.